Quickie Groove Brushless TT build.

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

Re: Quickie Groove Brushless TT build.

Postby elryko1992 » 06 Dec 2017, 18:05

Ok thanks, maybe you found the thread.
User avatar
elryko1992
 
Posts: 192
Joined: 05 Aug 2016, 21:08
Location: Romania

Re: Quickie Groove Brushless TT build.

Postby hank » 06 Dec 2017, 21:47

When finished tweeking to get how i like it
will then strip down all bits for powdercoating.
Going for all matt/satin black look or may have white frame. :roll:
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 483
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby shirley_hkg » 07 Dec 2017, 02:23

NEED 10" rims for TT GB to go tubeless .

Saw this , and it's a good 14" tubeless candidate for GB , without losing torque . goodpost givebeer
Attachments
IMG-20171204-WA0005.jpg
IMG-20171204-WA0006.jpg
shirley_hkg
 
Posts: 1546
Joined: 31 Dec 2010, 13:42

Re: Quickie Groove Brushless TT build.

Postby Burgerman » 07 Dec 2017, 04:20

Too thin. He likes the fat tyres, smoother ride, less sinking...
User avatar
Burgerman
Site Admin
 
Posts: 38114
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Quickie Groove Brushless TT build.

Postby hank » 07 Dec 2017, 10:19

Not for me shirley_hkg
but thanks :thumbup:
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 483
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby Burgerman » 07 Dec 2017, 13:14

Ends up 14.3 diameter. almost 4 wide. But very little sidewall.
User avatar
Burgerman
Site Admin
 
Posts: 38114
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Quickie Groove Brushless TT build.

Postby hank » 22 Feb 2018, 23:38

DSC05034.JPG
DSC05034.JPG (92.36 KiB) Viewed 622 times


Is there any way to disable freewheel levers on brushless motors
as one of mine has broke off level with casing
they are very brittle hollow plastic.

Could they be disabled with wiring or will have to remove lever arm part
inside casings first. :problem:
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 483
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby hank » 22 Feb 2018, 23:44

Wanted to blank them off with a cover plate if possible.
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 483
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby shirley_hkg » 23 Feb 2018, 01:47

YES , you can avoid the inhabit by just shorting that blue micro switch .

Another thing worth noting is the plastic linkage will get displaced after a dozen clicks of the solenoid . That will render you an ineffective parking brake .

I'll hot glue it . cheers
shirley_hkg
 
Posts: 1546
Joined: 31 Dec 2010, 13:42

Re: Quickie Groove Brushless TT build.

Postby hank » 23 Feb 2018, 14:48

I'll hot glue it . cheers

I take it you mean glue the broken part back together.
shirley :)
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 483
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby shirley_hkg » 23 Feb 2018, 15:14

hank wrote:
Is there any way to disable freewheel levers on brushless motors
as one of mine has broke off level with casing
they are very brittle hollow plastic.

Could they be disabled with wiring or will have to remove lever arm part
inside casings first. :problem:


NO, I mean you should find a way to prevent the plastic part from rotating (change to free wheel position by itself).

It is supposed to be held in place with a spring load linkage , but it is broken now .
shirley_hkg
 
Posts: 1546
Joined: 31 Dec 2010, 13:42

Re: Quickie Groove Brushless TT build.

Postby hank » 23 Feb 2018, 15:37

Shirley
Got you.
What i have done is made a alloy flat plate to cover over
casting hole area fixed on the original 4 screws.
put the lever in drive mode then cut the white freewheel
lever level to top face then covered with plate.
The lever cant move now.
Just lost freewheel access now. :thumbdown:
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 483
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Previous

Return to Everything Powerchair

Who is online

Users browsing this forum: ICEUK, shirley_hkg, woodygb and 64 guests

 

  eXTReMe Tracker